Easy Steps in Taking Care of Concealable Body Armor

Proper Handling Of Concealable Body Armor

Concealable body armor needs extra effort to assure unchanging ballistic protection level. However, due to the increased complexity of dealing with body armours, it is found to have a hard time in cleaning them. There are few important concepts to be considered in proper handling of these protective gears. As a matter of fact, the “donts” overturn the “dos”. So, if you have this problem of maintaining your vest without compromising any of the ballistic protection level and hygiene, you may take time to check this out.

Use Mild Detergent In Washing Concealable Body Armor

Concealable body armor must be cleaned and washed using the mildest home detergent. Specifically, harsh detergents should, by no means, be used. Commercial laundry thing is also a no-no in this purpose. You may ask why? Harsh laundry soaps can degrade the ballistic protection level of the armor. Accumulation of residual soap films in the textile can dwindle the protection properties of the material. Machine and commercial drying cleaning can be threatening too. Conversely, there is a so-called perchlorethylene that never degrade the protection level that your armor can give you.

Do Not Exposed Your Concealable Body Armor To Direct Sunlight

Concealable body armor must not be exposed to sun’s heat. Drying the armor after hand washing needs to be inside a place where there is no sunlight at all. Putting it in shade is also not suggested. The direct contact of the material with the sun’s heat shows adverse effect to the material’s properties, thus, affecting the purpose.

Concealable body armor must be checked from time to time before every use. The use of varied materials in making body armors are to be considered as well. Provided with the fact on probable lapses in vest manufacturing, body shield specifically Swat Body Armor needs to be fully checked to see if there are scratches and torn parts. Lastly, it is of highest probation to try repairing the vest on your own. It must be brought back to the manufacturer. And that is how we should define optimum protection.